- NITECORE Multi Task MT26 - 960 Lumens
- Max Output: 960 lumens
- Max Beam Distance: 256 m
- Max Beam Intensity: 16400 cd
- Max Run time: 45 h 0 m / 1.88 d
- LED: CREE XM-L2 T6
- Reflector: SMO
- Battery: 1 X 18650, 2 X CR123
- Special Modes: SOS, Strobe
- Beam color: White light
- Length: 149 mm
- Head Size: 34 mm
- Weight: 133 gr
- Feature: Tail Stand
The MT26 may be smaller than most high-output flashlights but it packs a powerful 960-lumen output.
This multi-task light has two modes: turbo and user-defined, which can be configured for just about any type of situation. With the head fully tightened, the light is in Turbo mode.
The light will output its maximum 960 lumens of output in this mode and allows momentary output with the tailcap switch. A half-press momentarily activates the light and a full press (click) gives constant output.
The MT26 uses a CREE XM-L2 led powered by two CR123 or 1 18650 battery and is impact resistant up to 4.9 feet and water resistant to IPX-8 standards.
With the head loosened about a half a turn, the light goes into the user defined mode. Switching the light on and off cycles through the different outputs: high, medium, low, SOS, and strobe. The last output level you select (after leaving the light off for more than 2 seconds) will remain when the light is turned on.
At any time, tightening the head will put the light back into Turbo mode.
Brightness Levels :
Turbo: 960 lumens, runtime 2 hrs
High: 275 lumens, runtime 5 hrs
Mid: 85 lumens, runtime 17.5 hrs
Low: 28 lumens, runtime 45 hrs
Included : Pouch, Lanyard, Pocket Clip, Spare O-ring(s), Spare Tailcap Boot, Tactical (Cigar) Ring